Brother DCP-120C - Manual (Page 64)

3 - 14 WALK-UP PHOTOCAPTURE CENTER ™
1
Insert a SmartMedia ® , CompactFlash ® , Memory Stick ® ,
Memory Stick Pro
™
, SecureDigital
™
, MultiMediaCard
™
or
xD-Picture Card
™
into your machine.
2
Load your document.
3
Press ( Scan ).
4
Press or to select Scan to Card.
To change quality, press Set and go to Step 5.
—OR—
Press Black Start or Color Start to start scanning without
changing any settings.
5
Press or to select the quality you want.
To change the file type, press Set and go to Step 6.
—OR—
To start scanning, press Black Start or Color Start .
6
Press or to select the file type you want.
Press Black Start or Color Start start scanning.
Changing the default quality
1
Press Menu .
2
Press or to select 2.PhotoCapture.
Press Set .
3
Press or to select 8.Scan to Card.
Press Set .
4
Press or to select 1.Quality.
Press Set .
5
Press or to select B/W 200x100 dpi , B/W 200 dpi,
Color 150 dpi , Color 300 dpi or Color 600 dpi.
Press Set .
6
Press Stop/Exit .
Do not take out the media card while PhotoCapture is blinking
to avoid damaging the card or data stored on the card.