Important safety instructions, Important safety instructions -3 – Brother DCP-120C User Manual
Page 70
5 - 3 IMPORTANT INFORMATION
Important safety instructions
1
Read all of these instructions.
2
Save them for later reference.
3
Follow all warnings and instructions marked on the product.
4
Unplug this product from the AC power outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
5
Do not use this product near water.
6
Do not place this product on an unstable cart, stand, or table.
The product may fall, causing serious damage to the product.
7
Slots and openings in the cabinet and the back or bottom are
provided for ventilation; to ensure reliable operation of the
product and to protect it from overheating, these openings must
not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or
over a radiator or heater. This product should never be placed
in a built-in installation unless proper ventilation is provided.
8
This product should be operated from the type of power source
indicated on the label. If you are not sure of the type of power
available, call your dealer or local power company.
Use only the power cord supplied with this machine.
9
Do not allow anything to rest on the power cord. Do not place
this product where people can walk on the cord.
10
If an extension cord is used with this product, make sure that the
total ampere ratings on the products plugged into the extension
cord do not exceed the extension cord ampere rating. Also,
make sure that the total of all products plugged into the AC
power outlet does not exceed 15 amperes (USA only).
11
Do not place anything in front of the machine that will block
printing. Do not place anything in the path of printing.
12
Wait until pages have exited the machine before picking them
up.
13
Never push objects of any kind into this product through cabinet
slots, since they may touch dangerous voltage points or short
out parts resulting in the risk of fire or electric shock. Never spill