Brother MFC-J4410DW - Manual (Page 21)

Sending a fax
15
3
NOTE
• If you did not use up any of the numbers
for Groups, you can broadcast faxes to as
many as 200 different numbers.
• The machine’s available memory will vary
depending on the types of jobs in the
memory and the number of locations used
for broadcasting. If you broadcast to the
maximum number available, you will not
be able to use dual access and delayed
fax.
• If the Out of Memory message
appears, press to cancel or OK to send
the pages scanned so far.
Canceling a Broadcast in progress
3
a
Press .
b
Do one of the following:
 To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
 To cancel the current job, press the
number being dialed on the
Touchscreen. Go to step d.
 To exit without canceling, press .
c
When the Touchscreen asks if you want
to cancel the entire broadcast, do one of
the following:
 Press Yes to confirm.
 To exit without canceling, press No.
d
Do one of the following:
 To cancel the current job, press Yes.
 To exit without canceling, press No.
Real Time Transmission
3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a
Load your document.
b
Press (Fax).
c
Press Options.
d
Press s or t on the Touchpanel to
display Real Time TX.
e
Press Real Time TX.
f
Press On (or Off).
g
Press OK.
h
Enter the fax number.
i
Press Fax Start.
NOTE
• If you are sending a color fax or if the
memory is full and you are sending a black
& white fax from the ADF
1
, the machine
will send the document in real time (even
if Real Time TX is set to Off).
1
MFC-J4410DW and MFC-J4610DW only.
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.