Brother MFC-J4410DW - Manual (Page 65)

PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
59
8
Cropping
8
If your photo is too long or too wide to fit the
available space on your chosen layout, part
of the image will be cropped.
The factory setting is On. If you want to print
the whole image, turn this setting to Off. If
you set Cropping to Off, also set
Borderless to Off. (See Borderless
printing on page 59.)
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
c
Do one of the following:
 Press View Photos and press
s
or t on the Touchpanel to display
each photo. When the photo you
want to print is displayed, press OK.
 Press Print All.
d
Press Options.
e
Press s or t to display Cropping.
f
Press Cropping.
g
Press Off (or On).
h
If you do not want to change additional
settings, press
or OK.
i
Press Start to print.
Cropping: On
8
Cropping: Off
8
Borderless printing
8
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
c
Do one of the following:
 Press View Photos and press
s
or t on the Touchpanel to display
each photo. When the photo you
want to print is displayed, press OK.
 Press Print All.
d
Press Options.
e
Press s or t to display Borderless.
f
Press Borderless.
g
Press Off (or On).
h
If you do not want to change additional
settings, press or OK.
i
Press Start to print.