Brother DCP-J152W - Manual (Page 14)

Introduction
10
1
e
Close the web browser.
Continue with the next procedure, How to register and delete accounts on the machine on page 10.
How to register and delete accounts on the machine
1
Enter the account information and configure your machine so that it can access the service.
You can register up to 10 accounts on your machine.
Register an account
1
For MFC-J650DW/J870DW/J875DW
1
a Before you register an account, confirm that the correct date and time are set on the machine’s control
panel. For more information on setting the date and time, see the Quick Setup Guide included with your
machine.
b Press d or c to display Web.
Press Web.
c Information regarding the Internet connection is displayed on the machine’s LCD. Read the information
and press OK.
d
You will be asked if you want to display this information again in the future.
Press Yes or No.
NOTE
Occasionally, updates or announcements about your machine's feature will be displayed on the LCD.
Read the information, and then press OK.
e
Press a or b to display the service with which you want to register.
Press the service.
f If information regarding Brother Web Connect is displayed, press OK.
g Press Register/Delete.
h Press Register Account.
i
The machine will prompt you to enter the temporary ID you received when you applied for Brother Web
Connect access.
Press OK.
j
Enter the temporary ID using the LCD.
Press OK.
NOTE
An error message will appear on the LCD if the information you entered does not match the temporary ID
you received when you applied for access, or if the temporary ID has expired. Either enter the temporary
ID correctly, or apply for access again to receive a new temporary ID (see How to apply for Brother Web
Connect access on page 8).