To select or change your receive mode, Setting ring delay – Brother MFC-3100C User Manual
Page 59
S E T U P R E C E I V E
6 - 2
BHLMFC-US-MFC3100C-FM5.5
To Select or Change Your Receive Mode
1
Press Receive Mode. The LCD shows your current selection.
2
Continue to press Receive Mode until your new selection appears. After two
seconds the LCD returns to the date and time display, along with your new
Receive Mode setting.
Setting Ring Delay
The Ring Delay setting determines the number of times the MFC rings before it
answers. If you have extension phones on the same line as the MFC, or
subscribe to the telephone company’s Distinctive Ring service, keep the Ring
Delay default setting of
4
. You can try setting the Ring Delay to
5
rings;
however, if you do not receive all your faxes, you must reset it to
4
Operation from Extension Telephone
1
Press Menu/Set, 2, 1, 1.
2
Press
to select how many times the line rings before the MFC answers
(00–05), and then press Menu/Set. If you select 00, the line doesn’t ring at all.
3
Press Stop/Exit.
If you are changing the Receive Mode while in another operation, the LCD
returns to that operation.
E X T . T E L / T A D
F A X O N L Y
M A N U A L
FAX :
FAX ONLY
EXT :
EXTERNAL TEL / TAD
MNL :
MANUAL
FAX :
FAX ONLY
EXT :
EXTERNAL TEL / TAD
MNL :
MANUAL
0 9 / 0 6 1 5 : 2 5 F A X
Current Receive Mode
1 . R I N G D E L A Y
or