Brother MFC-9325CW - Manual (Page 34)

34
Macintosh
Wireless Network
Configuration using the Installation CD-ROM and temporarily using a USB cable
(For Macintosh Users)
19
Configure the wireless
settings
a
Put the supplied CD-ROM into your CD-ROM
drive.
b
Double-click Start Here OSX to install.
c
Choose Wireless Network Connection and
then click Next.
d
Choose Use your computer or the control
panel directly and click Next.
e
Read the Important Notice. Check the box
after you confirm the SSID and Network Key,
and then click Next.
f
Choose Temporarily use a USB cable
(Recommended) and then click Next.
g
Temporarily connect the USB cable (not
included) directly to the computer and the
machine.
IMPORTANT
You need to temporarily use a USB cable
during configuration (cable not included).