Brother MFC-9325CW - Manual (Page 5)

5
d
Put paper in the tray, and make sure that the
paper is below the maximum paper mark
a .
The side to be printed on must be face down.
e
Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
f
Unfold the support flap a to prevent paper
from sliding off the face-down output tray.
5
Connect the power cord
and telephone line
a
Make sure that the machine’s power switch is
off. Connect the AC power cord to the machine.
b
Plug the AC power cord into an AC outlet. Turn
the power switch on.
c
Connect the telephone line cord. Connect one
end of the telephone line cord to the jack on the
machine marked LINE and the other end to a
modular wall jack.
IMPORTANT
Make sure the paper guides touch the sides of
the paper so it will feed properly.
1
IMPORTANT
DO NOT connect the interface cable yet.