Brother HL-2170W - Manual (Page 43)

Driver and Software
35
3
„ Job Spooling
The printer keeps the last print job sent to it in memory.
To reprint the last document, press the Go button and hold it down for about 4 seconds until all the LEDs
light up in order (Toner, Drum, Error, Ready), and then release the Go button. Within 2 seconds press
the Go button the number of times you want to reprint. If you don’t press the Go button within 2 seconds,
a single copy will be printed.
Note
If you want to prevent other people from printing your data using the reprint function, uncheck the
Use Reprint check box in the job spooling settings.
„ Quick Print Setup
This feature allows you to quickly choose driver settings by clicking a tasktray icon.
You can turn the quick print setting on or off. By placing a check in the selection boxes for the following
functions you can choose which will be available in the quick print setting.
• Multiple Page
• Manual Duplex
• Toner Save Mode
• Paper Source
• Media Type
„ Sleep Time
When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the printer acts as though it were turned off. When you choose Printer Default, the timeout setting has
been set to a specific time set at the factory, this can be altered in the driver. Intelligent Sleep Mode
automatically adjusts to the most suitable timeout setting depending on the frequency of your printer use.
While the printer is in sleep mode, the Ready LED lights up slightly, but the printer can still receive data.
Receiving a print file or document or pressing the Go button will automatically wake up the printer to start
printing.
To turn sleep mode off, from the Advanced tab, click the Device Options icon and choose Sleep Time.
Double-click the word Sleep Time, and the Sleep Time Off function will appear. Click Off to stop the printer
going into sleep mode. The Sleep Time Off function can be hidden by double-clicking the word Sleep Time
again. We recommend that you keep sleep mode on for power saving.
„ Macro (HL-2150N / HL-2170W only)
You can save a page of a document as a macro to the printer's memory. You can also execute the saved
macro (you can use the saved macro as an overlay on any document). This will save time and increase
printing speed for often used information such as forms, company logos, letterhead formats or invoices.