Brother MFC-440CN - Manual (Page 37)

31
5
5
Overview
5
If you are a Windows ® user and want to print using the TCP/IP protocol in a Peer-to-Peer environment, please
follow the instructions in this chapter. This chapter explains how to install the network software and the printer
driver which you will need to be able to print using your network printer.
Note
• You must configure the IP address on your machine before you proceed with this chapter. If you have not
configured the IP address, see Configuring your network printer on page 7 first.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• If you are connecting to a Nework Print Queue or Share (printing only), see Installation when using a
Network Print Queue or Share (printer driver only) on page 56 for installation details.
For Windows
®
98/Me/2000/XP users
5
Windows
®
98/Me/2000/XP users can send print job using Brother Peer-to-Peer Print software provided on
the CD-ROM which we have supplied with the machine.
If you have already installed the printer driver, jump to Printer driver already installed on page 32.
Configuring the standard TCP/IP port
5
Printer driver not yet installed
5
a Start the CD-ROM installation menu program according to the Quick Setup Guide.
b
Select the model name and your language (if necessary), and then click Install Other Drivers or
Utilities.
c Click Printer Driver (Only).
d Click Next in response to the Welcome message. Follow the on-screen instructions.
e
Select Standard Installation and click Next.
f Select Brother Peer-to-Peer Network Printer, and then click Next.
g Follow the on-screen instruction, and then click OK.
Note
Contact your administrator if you are not sure about the location and name of the printer in the network.
h Continue through the Wizard clicking Finish when complete.
Network printing from Windows
®
basic
TCP/IP Peer-to-Peer printing
5