Brother MFC J265W - Manual (Page 3)

3
DO NOT connect it to a DC power source or inverter. If you are not sure, contact a qualified
electrician.
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electrical shock and injury to people, including the following:
1
To reduce the risk of fire, electrical shock and injury to people;
 DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
 There are high voltage electrodes inside the machine. Before you clean the inside of the
machine, make sure you have unplugged the telephone line cord first (MFC only) and
then the power cord from the AC power outlet. Doing this will prevent an electrical shock.
2 Never spill liquid of any kind on the product. DO NOT attempt to service this product yourself
because opening or removing covers may expose you to dangerous voltage points and other
risks and may void your warranty. Refer all servicing to a Brother Authorized Service Center.
For the location of your nearest Brother Authorized Service Center, please call:
In USA: 1-877-BROTHER (1-877-276-8437)
In Canada: 1-877-BROTHER
3 Never install telephone wiring during a lightning storm. Never install a telephone wall socket
in a wet location. (MFC only)
4 Unplug this product from the power outlet and refer all servicing to Brother Authorized
Service Personnel under the following conditions:
 When the power cord is damaged or frayed.
 If liquid has been spilled into the product.
 If the product has been exposed to rain or water.
5 If an extension cord is used with this product, make sure that the total ampere ratings on the
products plugged into the extension cord DO NOT exceed the extension cord ampere rating.
Also, make sure that the total of all products plugged into the AC power outlet does not
exceed 15 amperes (USA only). (MFC only)