Brother MFC J265W - Manual (Page 6)

6
Slots and openings in the cabinet and the back or bottom are provided for ventilation. To ensure
reliable operation of the product and to protect it from overheating, these openings must not be
blocked or covered. The openings should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should never be placed near or over a radiator
or heater. This product should never be placed in a built-in installation unless adequate
ventilation is provided.
If the product has been dropped or the cabinet has been damaged, unplug this product from the
power outlet and refer all servicing to Brother Authorized Service Personnel.
IMPORTANT
• Disruption of power can wipe out information in the machine's memory.
• DO NOT put objects on top of the machine.
• DO NOT tip the machine, or place it on any tilted surface. Doing this may cause ink spillage
and internal damage to your machine.
• If the product does not operate normally when the operating instructions are followed, adjust
only those controls that are covered by the operating instructions. Improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician
to restore the product to normal operation.
• If the product exhibits a distinct change in performance, indicating a need for service.
• Use of controls, adjustments or performance of procedures other than those specified in User’s
Guide may result in hazardous invisible radiation exposure.