Brother MFC-5895CW - Manual (Page 100)

Control panel setup
90
6
f
Enter the Gateway address.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first three-digit number for the Gateway address.
Press c to enter the second three-digit number. Repeat this step until you have entered the fourth three-
digit number to complete the Gateway address. Press OK.
g
Press Stop/Exit.
For MFC-5490CN
6
a Press Menu, 5, 1, 4.
b Select 1 to change. Enter the Gateway address.
Press OK.
c Press Stop/Exit.
For Touchscreen models
6
a
Press MENU.
b
Press Network.
c (For Wired) Press Wired LAN.
(For Wireless) Press WLAN.
d Press TCP/IP.
e Press a or b to display Gateway and then press Gateway.
f Enter the Gateway address.
Press OK.
g Press Stop/Exit.