Brother MFC-5895CW - Manual (Page 46)

Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
36
3
1 (Windows Vista
®
)
Click , Network, and then Add a wireless device.
(Windows
®
7)
Click , Control Panel, Network and Internet, and then
Add a wireless device to the network.
2 Choose your machine and click Next.
3 Input the PIN from the printed page and then click Next.
4 Choose your network that you want to connect to, and then click Next.
5 Click Close.
h
If the LCD shows Connected, the machine has successfully connected to your router or access point.
You can now use your machine in a wireless network.
If the LCD shows Connection Failed, the machine has not successfully connected to your router or
access point. Try starting from e again. If the same message is indicated again, reset the machine back
to the default factory settings and try again. To reset, see Restoring the network settings to factory
default on page 133.
(For Windows ® )
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite or
Initial Installation / Install MFL-Pro Suite from the CD-ROM menu.
(For Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.
For Touchscreen models
3
a
Turn on the machine by plugging in the power cord.
b Press MENU.
c Press Network.
d Press WLAN.
e Press a or b to display WPS w/PIN Code, and then press WPS w/PIN Code.
f The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.