Brother MFC-J825DW - Manual (Page 195)

Remote Setup & PhotoCapture Center™ (For MFC-J625DW/J825DW/J835DW/J5910DW)
186
11
PhotoCapture Center™
11
You can access a memory card or a USB Flash memory drive installed in the machine from a computer.
CAUTION
DO NOT start your computer with a memory card or a USB Flash memory drive installed in the media drive
of the machine. You could lose your data or damage the media.
Note
• The PhotoCapture Center™ will read only the media that was put in first.
• While the machine is printing from the PhotoCapture Center™, your computer cannot access the
PhotoCapture Center™ for any other operation.
For USB cable users
11
a Put a memory card or USB Flash memory drive into your machine.
Note
If you create a name for the volume label of the memory card or USB Flash memory drive, the name
appears instead of Removable Disk.
b
Double-click the Removable Disk icon. The files and folders on the memory card or USB Flash memory
drive appear on your screen.
c
You can edit a file and save it to another drive on your computer.
d
Quit all applications that are running stored data on the memory card or USB Flash memory drive and
drag the Removable Disk icon into the Trash icon before you remove the memory card or USB Flash
memory drive from the machine.
CAUTION
DO NOT take out the memory card or USB Flash memory drive while the status LED or the PHOTO key is
blinking to avoid damaging the card, USB Flash memory drive or data stored on the card.
If you take out the memory card or USB Flash memory drive while the status LED or the PHOTO key is
flashing, you must restart your computer at once before putting the same memory card or USB Flash
memory drive into the machine. If you do not restart your computer, the data on your media may be
destroyed.