Brother MFC-J870DW - Manual (Page 20)

20
Windows
® Wired Network
For Windows
®
wired network interface users (MFC-J870DW/J875DW only)
(Windows ® XP Home/XP Professional/Windows Vista ® /Windows ® 7/Windows ® 8)
15
Before you install
Make sure that your computer is ON and you are
logged on with Administrator rights.
16
Connect the network
cable
a
Lift the scanner cover until it locks securely into
the open position.
b
Connect the network cable to the Ethernet port
marked with a
symbol a. You will find the
Ethernet port inside the machine, as shown in
the callout below. Remove the protective
cap b before connecting the cable.
NOTE
• If there are any programs running, close them.
• The screens may differ depending on your
operating system.
• The CD-ROM includes Nuance™ PaperPort™
12SE. This software supports Windows ® XP
Home (SP3 or greater), XP Professional (SP3
or greater), XP Professional x64 Edition (SP2
or greater), Windows Vista
® (SP2 or greater),
Windows
®
7 and Windows
®
8. Update to the
latest Windows
®
Service Pack before installing
MFL-Pro Suite.
• If you have previously set up your machine for
a wireless network and then want to set it up on
a wired network, make sure the machine’s
Network I/F is set to Wired LAN. The
wireless network interface will become inactive
with this setting.
On your machine, press (Settings).
Press All Settings.
Press a or b to display Network.
Press Network.
Press a or b to display Network I/F.
Press Network I/F.
Press Wired LAN.
Press .
1
2