Brother MFC-J870DW - Manual (Page 4)

4
3
Install the ink cartridges
CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
a
Make sure that the power is turned on.
The Touchscreen will show No Ink
Cartridge.
b
Open the ink cartridge cover a.
NOTE
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Before you connect the external telephone
answering machine, remove the white protective
cap a from the EXT. jack on the machine.
a Protective cap
(MFC-J650DW)
Carefully guide the telephone line cord out to the
back of the machine.
(MFC-J870DW and MFC-J875DW)
Carefully guide the telephone line cord from the
LINE jack into the cable channel and out the back
of the machine.
Carefully guide the telephone line cord from the
EXT. jack into the cable channel and out to the
right side of the machine.
Set the receive mode to External TAD if you
have an external answering machine. See
Choose the correct Receive Mode on page 10.
For additional details, see Connecting an external
TAD (telephone answering device) in chapter 6 of
the Basic User’s Guide.
1
NOTE
Make sure you install the Starter Ink Cartridges
included with your machine first.
NOTE
You can adjust the control panel angle to read the
Touchscreen more easily. Hold the edge of the
control panel to avoid accidentally pressing any of
the Touchscreen options.
1