Brother MFC-L8600CDW - Manual (Page 46)

Chapter 4
40
Setting the Fax Receive
Stamp
4
You can set the machine to print the received
date and time at the top center of each
received fax page.
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Fax.
d
Press Fax.
e
Swipe up or down, or press a or b to
display Setup Receive.
f
Press Setup Receive.
g
Swipe up or down, or press a or b to
display Fax Rx Stamp.
h
Press Fax Rx Stamp.
i
Press On (or Off).
j
Press .
NOTE
• Make sure you have set the current date
and time on the machine (see
• If you downloaded Internet Fax:
The received time and date will not appear
when using Internet Fax.
Receiving a fax at the end of a
conversation
4
At the end of a conversation you can ask the
other party to send you a fax before you both
hang up. Make sure the ADF is empty.
a
Ask the other party to place the
document in their machine and to press
the Start or Send key.
b
When you hear the CNG tones (slowly
repeating beeps), press Fax Start.
NOTE
• If the Touchscreen is dark for Sleep mode,
touch it to display Fax Start.
• If the machine is in Automatic Redial, wait
until it is finished and try again.
c
Press Receive to receive a fax.
d
Replace the external handset.
Basic User's Guide).