Brother MFC-L8600CDW - Manual (Page 23)

Security features
17
2
Turning Setting Lock on/off
2
If you enter the wrong password, the
Touchscreen displays Wrong Password.
Enter the correct password.
Turning Setting Lock on
2
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display General Setup.
d
Press General Setup.
e
Swipe up or down, or press a or b to
display Setting Lock.
f
Press Setting Lock.
g
Press Lock OffOn.
h
Enter the registered four-digit
administrator password using the
Touchscreen's keyboard.
Press OK.
Turning Setting Lock off
2
a
Press
on the Touchscreen.
b
Enter the registered four-digit
administrator password using the
Touchscreen's keyboard.
Press OK.
Restricting dialing
2
This feature is to prevent users from sending
a fax or call to a wrong number by mistake.
You can set the machine to restrict dialing
when you use the dial pad, Address Book and
Shortcuts.
If you choose Off, the machine does not
restrict the dialing method.
If you choose Enter # Twice, the machine
will prompt you to re-enter the number, and
then if you re-enter the same number
correctly, the machine will start dialing. If you
enter a different number, the Touchscreen
displays an error message.
If you choose On, the machine will restrict all
fax sending and outbound calls for that
dialing method.
Dial pad restriction
2
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Fax.
d
Press Fax.
e
Swipe up or down, or press a or b to
display Dial Restriction.
f
Press Dial Restriction.
g
Press Dial Pad.
h
Press Enter # Twice, On or Off.
i
Press .
䣕䣧䣶䣶䣫䣰䣩䢢䣎䣱䣥䣭