Brother MFC-L8600CDW - Manual (Page 97)

Options
91
B
Optional paper tray
(For MFC-L8600CDW
and MFC-L8850CDW
(LT-320CL))
(For MFC-L9550CDW
(LT-325CL))
B
An optional lower tray can be installed on the
MFC-L8600CDW, MFC-L8850CDW and
MFC-L9550CDW, and it can hold up to 500
sheets of 20 lb (80 g/m
2
) paper.
When an optional tray is installed, the
machine can hold up to 800 sheets of plain
paper.
For setup, see the instructions that we have
supplied with the lower tray unit.
WARNING
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray. You may
injure yourself or cause damage to the
machine because the Lower Tray is not
securely attached to the machine.
Memory board
B
Your machine has 256 MB of standard
memory and one slot for optional memory
expansion. You can increase the memory up
to maximum of 512 MB by installing one SO-
DIMM (Small Outline Dual In-line Memory
Module).
SO-DIMM Types
B
For information regarding memory for your
Brother machine please visit:
http://www.brother-usa.com/support/memory/.
In general, the SO-DIMM must have the
following specifications:
NOTE
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call the dealer you
bought the machine from or Brother
Customer Service.
Type 144-pin and 16-bit output
CAS latency 4
Clock
frequency 267 MHz (533 Mb/S/Pin) or
more
Capacity 256 MB
Height 1.18 in. (30.0 mm)
DRAM type DDR2 SDRAM