Brother MFC-8670DN - Manual (Page 37)

35
Make sure that you have finished the instructions from Step 1 “Setting Up
the machine” on pages 4 through 11.
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
®
if you already connected an
interface cable.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the drivers and MFL-Pro Suite. If the
language screen appears, choose your
language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and
restart your Macintosh
®
.
7
For Mac OS
®
X 10.5 users
➝
Connect the network cable to the machine,
then connect it to a free port on your hub.
For Mac OS
®
X 10.2.4 to 10.4.x users
➝
Wait for the DeviceSelector window to
appear before connecting the network
cable.
After the DeviceSelector window appears,
connect the network interface cable to the
machine, and then connect it to a free port
on your hub.
For Mac OS
®
X 10.2.4 or greater
The DeviceSelector window will not appear if
you have also connected a Network interface
cable to the machine
before restarting your
Macintosh
®
, if you are overwriting a previously
installed version of the Brother software, or if
you are using Mac OS
®
X 10.5. If you
encounter this problem continue with the
installation skipping Steps 12 to 14. You
should select your Brother machine from the
Model pull-down list in the main screen of
ControlCenter2. (For details, see the Software
Use’s Guide on CD-ROM.)
Continued ...
Ins
talling the Drivers
& Softw
are
Setting Up
the machin
e
Macintosh
®
Network
Network
Administrators