Brother MFC-8670DN - Manual (Page 44)

42
The BRAdmin Light is a utility for initial setup of Brother network connected devices. It can also
search for Brother products on your network, view the status and configure basic network
settings, such as IP address.
For more information on BRAdmin Light, visit us at http://solutions.brother.com.
Installing the BRAdmin Light
configuration utility
1
Click Install Other Drivers or Utilities on
the menu screen.
2
Click BRAdmin Light and follow the
on-screen instructions.
3
When the User Account Control screen
appears, click Allow.
Setting your IP address, Subnet
Mask and Gateway using BRAdmin
Light
1
Start BRAdmin Light. It will search for new
devices automatically.
2
Double-click the unconfigured device.
3
Choose STATIC for the Boot Method.
Enter the IP Address, Subnet Mask and
Gateway, and then click OK.
4
The address information will be saved to the
machine.
BRAdmin Light configuration utility
(For Windows Vista
®
users)
■ If you require more advanced printer management, use the latest Brother BRAdmin Professional utility
version that is available as a download from http://solutions.brother.com.
■ Make sure that you are using the Vista CD-ROM.
The default password for the print server is
‘access’. You can use BRAdmin Light to
change this password.
If you have a DHCP/BOOTP/RARP server in
your network, you don’t have to do the
following operation. Because the print server
will automatically obtain its IP address.