Alpine DVA-5205 - Manual (Page 13)

13
DVD menu
Use the “Joystick” or the number keys (“0” to “9”
and ”+10”) to select the desired item, then
press “ENT” or “
: ”.
Note: For some discs it is not possible to select
items from the menu screen using the
number keys (“0” to “9” and ”+10”).
SUB T. ON/OFF. AUDIO
ANGLE
OP/
CL
1 2 3
4 5 6
7 8 9
0
UP
+10
ENT
ENT
or
or
Video CD menu
Use the number keys (“0” to “9” and ”+10”) to
select the desired number, then press “ENT” or
“
: ”.
Note: The menu screen does not appear when the
PBC function is turned off. If this is the
case, press “MENU” to turn on the PBC
function.
Stopping
playback
Press the stop button during playback to stop
playback. That position is stored in the memory.
DVD
CD
Video CD
Press “ L ” during playback.
• Using the PRE-STOP function
When the PRE-STOP function is used, the
position at which playback is stopped is stored in
the memory, and playback resumes from that
position.
Press “ L ” once during playback.
“PRE-STOP” is displayed.
Press “ : : : : : ” in the PRE-STOP mode.
Playback starts from the position at which it
was stopped.
• Canceling the PRE-STOP function
Either press “ L ” again in the PRE-STOP mode
or eject the disc and turn the power or the ignition
key off to clear the memory.
Notes:
• The PRE-STOP function cannot be used with
video CDs equipped with playback control (PBC)
when the PBC function is turned on.
The menu screen appears when “
L ” is pressed.
• For some discs, the position at which playback
was stopped may not be accurate.
Stopping playback
Tips
Note: Playback starts at the beginning of the disc
whenever ignition is turned off or another
Ai-NET source is selected.
SOURCE
SLOW
ENT
or
SOURCE
SLOW
SUB T. ON/OFF. AUDIO
ANGLE
OP/
CL
1 2 3
4 5 6
7 8 9
0
UP
+10
+0/
SOURCE
SLOW
+0/