Brother DCP-165C - Manual (Page 51)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
39
5
White Balance
5
You can adjust the white areas of an image
and bring them back to pure white.
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture.
Press OK.
c
Press a or b to choose 5.True2Life.
Press OK.
d
Press a or b to choose On (or Off).
Press OK.
„ If you choose Off, then go to g.
e
Press a or b to choose
3.White Balance.
Press OK.
f
Press a or b to adjust the degree of the
balance.
Press OK.
g
Press Stop/Exit.
Sharpness
5
You can enhance the focus of an image by
adjusting the sharpness.
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture.
Press OK.
c
Press a or b to choose 5.True2Life.
Press OK.
d
Press a or b to choose On (or Off).
Press OK.
„ If you choose Off, then go to g.
e
Press a or b to choose 4.Sharpness.
Press OK.
f
Press a or b to increase or decrease the
sharpness.
Press OK.
g
Press Stop/Exit.
Color Density
5
You can adjust the total amount of color in the
image to improve a washed out or weak
picture.
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture.
Press OK.
c
Press a or b to choose 5.True2Life.
Press OK.
d
Press a or b to choose On (or Off).
Press OK.
„ If you choose Off, then go to g.
e
Press a or b to choose
5.Color Density.
Press OK.
f
Press a or b to increase or decrease the
amount of color.
Press OK.
g
Press Stop/Exit.
Note
Choosing White Balance, Sharpness, or
Color Density will make printing time
slower.