Brother DCP-165C - Manual (Page 89)

Troubleshooting and Routine Maintenance
77
B
Packing and shipping
the machine
B
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty.
CAUTION
It is important to allow the machine to ‘park’
the print head after a print job. Listen
carefully to the machine before unplugging
it to make sure that all mechanical noise
has stopped. Not allowing the machine to
finish this parking process may lead to print
problems and possible damage to the print
head.
a
Open the ink cartridge cover.
b
Press the lock release lever to release
the ink cartridge and take out all the ink
cartridges. (See Replacing the ink
cartridges on page 69.)
c
Install the green protective part and then
close the ink cartridge cover.
CAUTION
Make sure that the plastic tabs on both
sides of the green protective part (1) have
securely clicked into place (2).
If you are not able to find the green
protective parts, DO NOT remove the ink
cartridges before shipping. It is essential
that the machine be shipped with either the
green protective parts or the ink cartridges
in position. Shipping without them will
cause damage to your machine and may
void your warranty.
d
Unplug the machine from the AC power
outlet.
e
Using both hands, use the plastic tabs
on both sides of the machine to lift the
scanner cover until it locks securely into
the open position. Then unplug the
interface cable from the machine, if it is
connected.
1
2