Brother MFC-240C - Manual (Page 33)

18
3
On/Off key
3
When the machine is idle, you can turn it on
and off by pressing the On/Off key.
Note
If you have connected an external
telephone or TAD, it is always available.
Turning the machine off
3
a
Press and hold down the On/Off key
until the LCD shows Shutting Down.
The LCD light goes off.
Turning the machine on
3
a
Press the On/Off key.
On/Off setting
3
You can customize the machine's On/Off
key. The default setting is
Fax Receive:Off
. Your machine will not
work when it is switched off, but it will clean
the print head periodically. The external TAD
or telephone will always work. If you turn this
setting to Fax Receive:On, you can
receive faxes or calls even when the machine
is switched off. (See On/Off key on this page.)
a
Press Menu, 1, 6.
b
Press a or b to choose
Fax Receive:On
, or
Fax Receive:Off
.
Press OK.
c
Press Stop/Exit.
1 You cannot receive a fax automatically even if you
have set the receive mode to Fax/Tel.
Mode Timer
3
The machine has four temporary mode keys
on the control panel: Fax, Scan, Copy and
PhotoCapture. You can change the amount
of time the machine takes after the last Scan,
Copy or PhotoCapture operation before it
returns to Fax mode. If you choose Off, the
machine stays in the mode you used last.
a
Press Menu, 1, 1.
b
Press a or b to choose 0 Sec,
30 Secs
, 1 Min, 2 Mins, 5 Mins or
Off
.
Press OK.
c
Press Stop/Exit.
General setup
3
On/Off
setting Receive
mode Available
operations
Fax
Receive:
Off
(default)
— No machine
operations will be
available.
Fax
Receive:
On
Fax Only
External
TAD
Fax Receive, Easy
Receive:
„ You cannot
receive a fax with
Black Start or
Color Start.
Manual
Fax/Tel
1
Easy Receive:
„ You cannot
receive a fax with
Black Start or
Color Start.