Brother MFC-240C - Manual (Page 67)

Chapter 10
52
Changing copy quality
10
You can select from a range of quality
settings. The default setting is Normal.
To temporarily change the quality setting,
follow the instruction below:
a
Make sure you are in Copy mode .
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options and a or b to
choose Quality.
Press OK.
e
Press a or b to choose Normal, Best
or Fast. Press OK.
f
Press Black Start or Color Start.
To change the default setting, follow the
instruction below:
a
Press Menu, 3, 1.
1.Quality
b
Press a or b to choose Normal, Best
or Fast. Press OK.
c
Press Stop/Exit.
Enlarging or reducing the
image copied
10
You can select the following enlargement or
reduction ratios:
Custom(25–400%)
allows you to enter a
ratio from 25% to 400%.
Auto sets the machine to calculate the
reduction ratio that best fits the size of paper.
To enlarge or reduce the next copy follow the
instruction below:
a
Make sure you are in Copy mode .
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options and a or b to
choose Enlarge/Reduce.
Press OK.
Press
Copy Options
Normal
Normal is the
recommended
mode for ordinary
printouts. This
produces good copy
quality with good
copy speed.
Fast
Fast copy speed
and lowest ink
consumption. Use to
save time printing
documents to be
proof-read, large
documents or many
copies.
Best
Use best mode to
copy precise images
such as
photographs. This
provides the highest
resolution and the
slowest speed.
Press
Copy Options
and then a or b to
choose
Enlarge/Reduce
Custom(25–400%)
200%
198% 4”
×6”iA4
186% 4”
×6”iLTR
142% A5 iA4
104% EXE iLTR
100%
97% LTR iA4
93% A4 iLTR
83% LGL iA4
78% LGL iLTR
69% A4 iA5
50%