Brother HL-S7000DN - Manual (Page 43)

Control panel setup
37
4
Printing the Network Configuration Report
4
Note
Node name: The Node name appears on the Network Configuration Report. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
the last 6 figures of your machine’s MAC Address / Ethernet Address.)
The Network Configuration Report prints a report listing all the current network configuration including the
network print server settings.
a
Press Menu.
b Press a or b to choose Machine Info.
Press OK.
c
Press a or b to choose Print NetSetting.
Press OK.
Note
If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.