Brother HL-S7000DN - Manual (Page 45)

Control panel setup
39
4
Function table and default factory settings
4
Factory settings are shown in Bold with asterisk.
Main menu Submenu Menu Selections Options
Network Wired LAN TCP/IP Boot Method Auto*
Static
RARP
BOOTP
DHCP
IP Address
(000.000.000.000)*
1
Subnet Mask
(000.000.000.000)*
1
Gateway (000.000.000.000)
Node Name BRNXXXXXXXXXXXX= (last 6
figures of your machine’s MAC
Address / Ethernet Address)
(up to 32 characters)
WINS Config Auto/Static
WINS Server Primary/Secondary
[000].[000].[000].[000]
DNS Server Primary/Secondary
[000].[000].[000].[000]
IP Boot Tries 0/1/2/3*.../32767
APIPA On*
Off
IPv6 On
Off*
Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Wired Status — Active 1000B-FD
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF