Brother MFC-J245 - Manual (Page 8)

8
6
Set the date and time
The LCD displays the date and time. You can also
add the current date and time to each fax you send by
setting your Station ID (see step
10).
a
When the LCD shows this message, press OK.
Date&Time
q
Enter & OK Key
b
Enter the last two digits of the year on the dial
pad, and then press OK.
Year:2013
(e.g. Enter 1 3 for 2013.)
c
Enter the two digits for the month on the dial
pad, and then press OK.
d
Enter the two digits for the day on the dial pad,
and then press OK.
e
Press a or b to choose 12h Clock or 24h
Clock, and then press OK.
f
Enter the time on the dial pad, and then press
OK.
(12h Clock only)
Press a or b to choose AM or PM, and then
press OK.
7
Choose your language
(if needed)
a
Press Menu, 0, 0.
0.Local Language
b
Press a or b to choose your language.
Press OK.
c
Press Stop/Exit.
8
Set the LCD contrast
(if needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu, 2, 5.
5.LCD Contrast
b
Press a or b to choose Dark or Light.
Contrast:Dark
Contrast:Light
c
Press OK.
d
Press Stop/Exit.
NOTE
You can change date, time, or clock type (12h or
24h) at any time. For more information, see
Setting the date and time in the Basic User’s
Guide.