Brother MFC-J615W - Manual (Page 53)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
47
8
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo or
picture.
Press OK.
d
Press a or b to choose
Remove Red-Eye.
Press OK.
 When Remove Red-Eye is
successful, the photo with the effect
is shown. The adjusted part is shown
in a red frame.
 When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press OK.
Note
Press # to try Remove Red-Eye once
again.
e
Press OK and enter the number of
copies you want using the dial pad.
f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center
®
print settings on page 50.)
 If you do not want to change any
settings, press Color Start to print.
Monochrome
8
You can convert your photo to black & white.
a
Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo or
picture.
Press OK.
d
Press a or b to choose Monochrome.
Press OK.
e
Press OK and enter the number of
copies you want using the dial pad.
f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center
®
print settings on page 50.)
 If you do not want to change any
settings, press Color Start to print.
Sepia
8
You can convert the color of your photo to
sepia.
a
Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo or
picture.
Press OK.
d
Press a or b to choose Sepia.
Press OK.
e
Press OK. Then enter the number of
copies you want using the dial pad.
f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center
® print settings on page 50.)
 If you do not want to change any
settings, press Color Start to print.