Brother MFC-8500 - Manual (Page 102)

11 - 6 M A K I N G C O P I E S
Changing Default Copy Settings
Press Menu and 3 to change default settings for Copy mode. These settings will
remain until you change them again by pressing Menu. Adjust the Contrast and
Quality settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press or to scroll through the options for each setting. Press Set to
save your selection. Press Stop/Exit—OR—Press to select the next setting
you want to change.
Press Menu, and 3.
Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting
is
AUTO , which is used for originals that contain both text and photographs.
TEXT is used for originals containing only text. PHOTO is used for copying
photographs.
1
Press Menu, 3, 1.
2
Press or to choose the type of
original ( AUTO , TEXT or PHOTO ),
and then press Set.
3
Press Stop/Exit.
Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1
Press Menu, 3, 2.
2
Press to make a copy lighter—OR—
Press to make a copy darker, and then press Set.
3
Press Stop/Exit.
TEXT
1.COPY MODE
2.CONTRAST - +
is default
AUTO
PHOTO
1 . C O P Y M O D E
2 . C O N T R A S T