Brother PT-H500 - Manual (Page 58)

1
2
3
4
5
6
7
8
57

T
R
OUBL
E
S
HOOT
IN
G
Error Messages
Tape Width Limit!
Max 1 Line There is more than one line of text when you press the Print or
Preview key while using 0.13" (3.5 mm) tape. Limit the number of
lines to one, or replace with a larger width tape cassette.
Block Limit! Max 5
Blocks There are already five blocks of text. Limit the number of blocks to
five.
Length Limit! The length of the label to be printed using the text entered is longer
than 39.37" (1 m). Edit the text so that the length of the label is less
than 39.37" (1 m).
Insert 0.94" Tape
Cassette!
Insert 24mm Tape
Cassette!
A 0.94" (24 mm) tape cassette is not installed when Template or
Block Layouts for 0.94" (24 mm) tape is selected. Install a 0.94"
(24 mm) tape cassette.
Insert 0.70" Tape
Cassette!
Insert 18mm Tape
Cassette!
A 0.70" (18 mm) tape cassette is not installed when Template or
Block Layouts for 0.70" (18 mm) tape is selected. Install a 0.70"
(18 mm) tape cassette.
Insert 0.47" Tape
Cassette!
Insert 12mm Tape
Cassette!
A 0.47" (12 mm) tape cassette is not installed when Template or
Block Layouts for 0.47" (12 mm) tape is selected. Install a 0.47"
(12 mm) tape cassette.
Insert 0.35" Tape
Cassette!
Insert 9mm Tape
Cassette! A 0.35" (9 mm) tape cassette is not installed when Template or Block
Layouts for 0.35" (9 mm) tape is selected. Install a 0.35" (9 mm) tape
cassette.
Insert 0.23" Tape
Cassette!
Insert 6mm Tape
Cassette!
A 0.23" (6 mm) tape cassette is not installed when Template or Block
Layouts for 0.23" (6 mm) tape is selected. Install a 0.23" (6 mm) tape
cassette.
Insert 0.13" Tape
Cassette!
Insert 3.5mm Tape
Cassette!
A 0.13" (3.5 mm) tape cassette is not installed when Template or
Block Layouts for 0.13" (3.5 mm) tape is selected. Install a 0.13"
(3.5 mm) tape cassette.
Too Much Text For
This Layout! The maximum number of characters for the selected layout have
already been entered. Edit the text to use fewer characters or use a
different layout.
Text Too Long! The length of the label to be printed using the text entered is longer
than the length setting. Edit the text to fit within the set length or
change the length setting.
Message Cause/Remedy