Brother MFC-J4410DW - Manual (Page 215)

Network Scanning
207
13
i
(For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
j
Press Set with Touch Panel.
Press On.
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on a computer that is
connected to the machine.
k
Choose the settings for Scan Type, Resolution, File Type, Skip Blank Page
1
and
Remove Background Color as needed.
1 (For MFC-J4710DW)
l Press OK.
m
Press Start.
The machine starts scanning the document, creates a file attachment, and launches your E-mail
application displaying a new E-mail.
For MFC-J4310DW/J4410DW/J4610DW
13
a Load your document.
b
Press Scan.
c
Press s or t to display Scan to email.
d Press Scan to email.
e Press s or t to display the computer that you want to use to E-mail the document.
f Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD.
Press OK.
Do one of the following:
 If you want to use the default settings, go to k.
 If you want to change the default settings, go to g.
g
Press Options.
h
Press Set with TouchPanel.
Press On.
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on a computer that is
connected to the machine.