Pc-fax receiving – Brother MFC-J4410DW User Manual
Page 116
Brother PC-FAX Software (For MFC models)
108
5
PC-FAX receiving
5
The Brother PC-FAX Receive software lets you view and store faxes on your computer. It is automatically
installed when you install the MFL-Pro Suite and works on locally or network connected machines.
When enabled, your machine will receive faxes in its memory. Once it has received the fax, it will
automatically be sent to your computer.
If you turn your computer off, your machine will continue to receive and store your faxes in its memory. The
machine's Touch Panel will display the number of stored faxes received.
When you switch your computer on, the PC-FAX Receive software automatically transfers your faxes to your
computer.
To enable the PC-FAX Receive software, do the following:
Before you use the PC-FAX Receive function, you must choose PC-FAX Receive from the menu on
the machine.
Run the Brother PC-FAX Receive software on your computer. (We recommend you select the Add to
Startup folder check box, so that the software automatically runs and can transfer any faxes on computer
startup.)
NOTE
• Refer to the guide and the website noted below for more information.
See Basic User’s Guide: Troubleshooting.
Visit the Brother Solutions Center
• To use PC-FAX receiving with a computer that is protected by a firewall, the Network PC-FAX receiving
program must be excluded from the firewall setting. If you are using Windows
®
Firewall and you installed
MFL-Pro Suite from the CD-ROM, the necessary Firewall settings have already been made. For more
information, see Firewall settings (For Network users) on page 116.