Configuring the network pc-fax receiving settings, 5configuring the network pc-fax receiving settings – Brother MFC-J4410DW User Manual
Page 120
Brother PC-FAX Software (For MFC models)
112
5
Configuring the Network PC-FAX Receiving Settings
5
The settings to send received faxes to your computer were automatically configured during the installation of
MFL-Pro Suite. See Quick Setup Guide.
If you are using a different machine than the one that was registered to your computer during the installation
of the MFL-Pro Suite software, follow the steps below.
a
In the PC-Fax Rx Setup dialog box, click Network Settings. The Network Settings dialog box
appears.
b
You must specify the IP address or node name of your machine.
Choose the appropriate connection method.
Specify your machine by address
Enter the IP address of the machine in IP Address.
Specify your machine by name
Enter the machine’s node name in Node Name, or click Browse and choose the correct Brother
machine you want to use from the list.
Display Your PC Name