Brother MFC-J4410DW - Manual (Page 55)

Scanning
47
2
Scanning a document using the WIA driver
2
WIA compliant
2
For Windows ® XP/Windows Vista ® /Windows ® 7 you can choose Windows ® Imaging Acquisition (WIA) when
scanning images. You can scan images directly into the PaperPort™ 12SE viewer that Brother included with
your machine or you can scan images directly into any other applications that support WIA or TWAIN
scanning.
NOTE
(For MFC-J4710DW)
Windows
®
XP does not support 2-sided scan in the WIA driver.
If you want to do 2-sided scanning, use the TWAIN driver. For more information, see Scanning a document
using the TWAIN driver on page 38.
Scanning a document into the computer
2
There are two ways to scan a whole page. You can either use the ADF (automatic document feeder) or the
Flatbed scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you must scan using
the scanner glass (Flatbed). (See Pre-Scanning and cropping a portion using the scanner glass on page 49.)
a
Load your document.
b
Start the Nuance™ PaperPort™ 12SE software that was installed during the MFL-Pro Suite installation
to scan a document.
NOTE
• Depending on your model Nuance™ PaperPort™ 12SE may not be included. If it is not included, please
use other software applications that support scanning.
• The instructions for scanning in this guide are based on Nuance™ PaperPort™ 12SE. The process will
vary when scanning from other applications.
c
Click Scan Settings from the Desktop tab on the ribbon.
The Scan or Get Photo panel appears on the left side of the screen.
d
Click Select.
e
Choose WIA:Brother MFC-XXXX or WIA:Brother MFC-XXXX LAN from the Available Scanners list.
(Where XXXX is your model name.)
NOTE
If you choose TWAIN: TW-Brother MFC-XXXX, the TWAIN driver will start.
f Check the Display scanner dialog box on the Scan or Get Photo panel.