Viewing the stitch pattern while creating it, Drawing a stitch pattern in fill/stamp mode, Programmable stitch creator – Brother PE-DESIGN Ver.6 User Manual
Page 220
212
Programmable Stitch Creator
Viewing the Stitch Pattern While Creating It
You can display the Preview window to view a repeating image of the stitch pattern as you create it.
1.
If the Preview window isn’t displayed, click
Display, then Preview.
The Preview window for the selected Mode
setting appears, as shown in the examples
below, and a check mark appears to the left of
the menu command Display – Preview.
The image in the Preview window is updated
as you enter the changes in the work area.
2.
To close the Preview window, click its close
button, or click the menu command Display –
Preview to remove the check mark.
b
Memo:
• The Preview window can be resized.
• The setting for displaying the Preview
window is retained, until it is changed.
Drawing a Stitch Pattern in Fill/Stamp
Mode
The Line tool allows you to draw broken lines to create your fill/stamp stitch pattern. A broken line is made of
one or more connected straight lines with the end point of one straight line being the start point of the next line.
The horizontal and vertical lines that you draw on the work area always follow the grid. The points that you
create by clicking the mouse button are inserted at the intersection of the horizontal and vertical lines of the
grid, enabling you to draw diagonal lines as well. Regardless of where you click, a point will automatically be
inserted at the nearest intersection.
Depending on the stitch pattern that you want to draw, you may need to select a grid of a different size. In
addition, by selecting None, the point will no longer be inserted at the nearest intersection, allowing you to
create curved patterns. For details on the grids and adjusting them, refer to “Changing the grid settings” on
page 222.
1.
Click
on the Tool Box.
→ When the pointer is moved over the work
area, the shape of the pointer changes to
.
2.
Click in the work area to specify the start point.
Fill/Stamp mode
Motif mode
a
Note:
This tool can only be used in Fill/Stamp
mode.
PeDesignV6Eng.book Page 212 Thursday, July 8, 2004 11:59 AM