Brother MFC-J285DW - Manual (Page 26)

12
2
Loading paper and
other print media
2
Load only one size of paper and one type of
paper in the paper tray at a time.
(For more information about paper size,
weight and thickness, see Choosing the right
print media on page 21.)
a
Pull the paper tray completely out of the
machine.
NOTE
• If the paper support flap (1) is open, close
it, and then close the paper support (2).
• When you load a different paper size in
the tray, you will need to change the
machine’s Paper Size setting at the
same time.
(See Paper Size on page 18.)
b
Lift the output paper tray cover (1).
c
Gently press and slide the paper width
guides (1) and then the paper length
guide (2) to fit the paper size.
Make sure that the triangular marks (3)
on the paper width guides (1) and paper
length guide (2) line up with the marks
for the paper size you are using.
Loading paper
2
2
1
1
1
2
3
3