Brother HL-8050N - Manual (Page 100)

TCP/IP CONFIGURATION 10 - 1
10
10
TCP/IP Configuration
Assigning TCP/IP Information
Overview
The TCP/IP protocol requires that each device on the network have
it's own unique IP address. Use the following information to learn
about IP address configuration.
The Automatic Private IP Addressing (APIPA) protocol automatically
assigns an IP address from the range: 169.254.1.0 to
169.254.254.255. If the APIPA protocol is disabled, the default IP
address of a Brother print server is 192.0.0.192. However, you can
easily change this IP address number to match with the IP address
details of your network. This can be done in any of the following
ways:
■ From your printer’s control panel settings (if your printer has an
LCD panel).
■ BRAdmin application (for Windows ® 95/98/Me, Windows NT ® 4.0
and Windows ® 2000/XP, using the IPX/SPX or TCP/IP protocols).
■ DHCP, APIPA, Reverse ARP (rarp) or BOOTP.
■ The ARP command.
■ Brother BRCONFIG NetWare utility (a Novell Network is
necessary).
■ Web BRAdmin
■ TELNET.
■ HTTP (Web browser).
■ Other SNMP based management utility.