Brother MFC-5460CN - Manual (Page 27)

Control panel setup
22
3
Del Error Mail
3
When set to On, the machine automatically deletes error mails that the machine can not receive from the POP
server.
a Press Menu, 5, 3, 4.
b
Press a or b to select On or Off.
c
Press OK.
d Press Stop/Exit.
Notification
3
The notification feature allows a receive notification message to be transmitted to the sending station to
indicate successful reception of the I-Fax.
When switched to “ON” a fixed message is sent back to the sending station to indicate successful reception
and processing of the message. These fixed messages depend on the operation requested by the sending
station.
Report messages consist of
SUCCESS : Received From <mail address>
When switched to “MDN” a report as described above is sent back to the sending station if the originating
station sent the “MDN” field to request confirmation.
a Press Menu, 5, 3, 5.
b Press a or b to select On or MDN or Off.
c
Press OK.
d
Press Stop/Exit.
Setup Mail TX
3
This field displays the subject that is attached to the Internet Fax data being sent from the Brother machine
to a PC (default is “Internet Fax Job”).
Sender Subject
3
a Press Menu, 5, 4, 1.
b Select 1 to change the Sender Subject—OR—2 to exit.
c Enter the subject information.
d Press OK.
e
Press Stop/Exit.