Brother MFC-9700 - Manual (Page 67)

S E T U P S E N D 6 - 8
Composing Your Own Comments
You can set up two custom comments.
1
Press Menu, 2, 2, 9.
2
Press or to choose position 5 or 6
for your customized comment, and then press Set.
3
Use the dial pad to enter your customized comment, and then press Set.
(See
Entering Text , page 4-4.)
4
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings.
Cover Page for the Next Fax Only
Make sure the Station ID is set up. (see page 4-3.) This feature does not work
without the Station ID.
You can set the fax to send a cover page with a particular fax. This cover page
will include the number of pages in your original.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Press Menu, 2, 2, 8.
3
When the LCD shows NEXT FAX ONLY ,
press Set.
4
Press or to select ON (or OFF ), and then press Set.
5
Press or to select one of the standard or custom comments, and then
press Set.
6
Enter two digits to indicate the number of pages you are sending, and then press
Set. (For example, press 0 2 for 2.) (Enter 0 0 to leave the number of pages
blank.) If you make a mistake, press
to back up and reenter the number of
pages.
7
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings.
8
Enter the fax number you’re calling.
9
Press Fax Start.
9.COVERPAGE MSG
8.COVERPG SETUP