Brother MFC-9700 - Manual (Page 88)

11 - 1 M A K I N G C O P I E S
11
11
Making Copies
Basic Copy Operations
You can use your MFC as a copier,
making up to 99 copies at a time.
The MFC can stack the copies or
collate (sort) them.
The scannable area of your MFC
begins at approximately one-sixth
inch (4mm) from the edge of the
paper.
Making a Single Copy (Using the ADF)
1
Place the original face up in the ADF.
2
Press Copy.
Do NOT pull on the paper while
copying is in progress.
Making Multiple Copies (Using the ADF)
1
Insert the original face up in the ADF.
2
Use the dial pad to enter the number of copies you want (up to 99).
3
Press Copy.
Incoming faxes cannot be received on paper or into memory while the MFC is
copying.
To stop copying and eject the original, press Stop/Exit.
To release the original document, press Stop/Exit.
To sort the copies, use the Options key.
(See
Using the Options Key , page 11-5.)
Copy
Keys
Not
Scannable
area
1/6" (4mm)
1/6" (4mm)
COPYING P.01