Brother NC-2100p User Manual
Page 59
CHAPTER 6 APPLETALK (ETHERTALK) TCP/IP PRINTING
6-4
How to Select the Print Server
(AppleTalk/EtherTalk)
Once the print server is connected on your network and the printer is powered on,
the Brother print server’s Apple Talk service name (default is BRO_xxxxxx_P1_AT,
where xxxxxx is the last six digits of the Ethernet address (Mac address) should
appear in the Chooser.
You can find the service name and MAC address by printing out the printer
configuration page.
Refer to Appendix of this user guide how to print the
1. Open the Chooser from the Apple Menu on the Macintosh, and then click on
the LaserWriter icon (if necessary, select the appropriate AppleTalk zone
from the Network Control Panel).
Figure 2 Macintosh Chooser
2. Click on the appropriate print server and close the Chooser program. You
should now be able to print from the Macintosh.
If you cannot see the print server, first make sure that your cabling is correct and that
you have enabled EtherTalk from your Macintosh Network Control Panel. You may
also need to force the print server into the correct AppleTalk zone using the
BRAdmin Professional utility or a web browser.