Brother MFC-665CW - Manual (Page 82)

Control panel setup
75
6
e Press a or b to select Change.
Press OK.
f Enter the Node Name.
Press OK.
Note
DCP models cannot change the Node Name from the control panel menu.
g Press Stop/Exit.
WINS Config
6
This selection controls how the machine obtains the IP address of the WINS server.
a Press Menu.
b Press a or b to select LAN.
Press OK.
c (For Wired) Press a or b to select TCP/IP(Wired).
(For Wireless) Press a or b to select TCP/IP(WLAN).
Press OK.
d
Press a or b to select WINS Config.
Press OK.
e
Press a or b to select Auto or Static.
Press OK.
f Press Stop/Exit.
Auto
6
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto for this feature to work.
Static
6
Uses a specified IP address for the primary and secondary WINS servers.
WINS Server
6
a
Press Menu.
b Pressa or b to select LAN.
Press OK.
c
(For Wired) Press a or b to select TCP/IP(Wired).
(For Wireless) Press a or b to select TCP/IP(WLAN).
Press OK.