Brother MFC-665CW - Manual (Page 88)

Control panel setup
81
6
Network I/F
6
You can choose the network connection type, wired network connection or wireless network connection. If
you want to use the wired network connection, select Wired LAN, and if you want to use the wireless network
connection, select WLAN. You can only have one network connection type active at a time.
a
Press Menu.
b Press a or b to select LAN.
Press OK.
c
Press a or b to select Network I/F.
Press OK.
d
Press a or b to select Wired LAN or WLAN.
Press OK.
Printing the Network Configuration List
6
Note
Node name: Node name appears in the Network Configuration List. The default Node name is
“BRN_xxxxxx” for a wired network or “BRW_xxxxxx” for a wireless network (“xxxxxx” is the last six digits
of Ethernet address).
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a Press Menu.
b Press a or b to select Print Reports.
Press OK.
c Press a or b to select Network Config.
Press OK.
d Press Black Start or Color Start.
Restoring the network settings to factory default
6
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a Press Menu.