Brother DCP-J152W - Manual (Page 21)

21
For Wireless Network Users
Wirele
ss Network
12 One-push setup using
WPS or AOSS™
(Windows ® ,
Macintosh and mobile devices)
a
Confirm your wireless access point/router has
the WPS or AOSS™ symbol as shown below.
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your access point/router.
If you began the configuration from step 7 on
page 7, go to d.
All other users go to c.
c
On your machine, press Menu.
Press a or b to choose Network. Press OK.
Press a or b to choose WLAN. Press OK.
d
Press a or b to choose WPS/AOSS. Press OK.
When Enable WLAN? is displayed, press OK
to accept.
This will start the wireless setup wizard.
e
When the LCD instructs you to start WPS or
AOSS™, press the WPS or AOSS™ button on
your wireless access point/router (for more
information, see the instructions provided with
your wireless access point/router), and then
press OK on your machine.
This feature will automatically detect which
mode (WPS or AOSS™) your wireless access
point/router uses to configure your machine.
When appears on the LCD, press OK.
Wireless setup is now complete.
To install MFL-Pro Suite, continue to
step 13.
For Windows
®
users:
Now go to
Page 24
For Macintosh users:
Now go to
Page 27
NOTE
If your wireless access point/router supports WPS
and you want to configure your machine using the
PIN (Personal Identification Number) Method,
see Configure Your Wireless Network Using the
PIN Method of Wi-Fi Protected Setup™ (WPS) in
the Software and Network User’s Guide.
OK OK
NOTE
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
on page 22.
NOTE
For mobile device users:
• Connect your mobile device to a wireless
access point/router using a Wi-Fi connection.
• Download and install Brother iPrint&Scan
(Android™/iOS/Windows
®
Phone) from your
mobile device’s application download site. You
can also use AirPrint (iOS) with this machine.
• To download the User’s Guide for the
application you are using (Brother
iPrint&Scan/AirPrint), visit the Brother
Solutions Center at
http://solutions.brother.com/ and click Manuals
on your model’s page.
• If you began the setup from step 7 on page 7,
go back to step 8 on page 8 to continue the
machine settings.