Audiovox XR9 - Manual (Page 12)

Momentarily pressing the SELECT button will exit
the current artist/song title information and return
to the memory list.
3. When the T SEL function is active, each time the
XR9 is turned on, it automatically searches
the incoming signal to determine if a match exists
between the signal and the currently saved infor-
mation stored in receiver memory. If one or more
matches are found, an audible beep tone will be
heard indicating that a match has been found. The
display then reverts to the Song Found screen
which displays the current matches. You can now
select the Artist/Song that you wish to listen to.
-12-
a. If one or more matches are found, a display list
appears, and allows you to scroll through the list
of songs using the CH Up/Down buttons. Once a
song is found, it can be selected by pressing the
SELECT button, and the display will revert to ei-
ther of the selected display modes.
b. If a selection is not chosen within 10 seconds
after the last action, the screen will revert to the
previously selected display and tuning mode.
NOTE: Play of the current selection will con-
tinue until a new selection is made.