Audiovox XR9 - Manual (Page 21)

-21-
Set Alarm:
When this menu option is highlighted and selected,
you will be able to set the unit to turn on at a specific
time. The last selected channel prior to shutdown
will be present when the Alarm feature is activated.
Additionally, a series of beep tones will be heard.
Press any button on the front panel to silence the
alarm tones. The alarm will trigger again at the set
time unless the Alarm Off feature is selected under
the Set Alarm function.
Set Alarm (Default-Off)
Use the Channel Up/Down buttons to toggle
between Alarm On or Alarm Off and press the
SELECT Button for desired alarm status. When
the alarm is on, the time will be displayed on
the default screen in reverse image.
Alarm Time
When this menu option is highlighted and
selected the current alarm setting is displayed.
The factory default is 12:00PM. Use the category
Up/Down buttons to highlight either the hours,
minutes or AM/PM for adjustment. Once high-
lighted, use the Channel Up/Down buttons
to adjust the selection. AM or PM will also
switchautomatically when the AM or PM thresh-
old has been exceeded. When the desired time
i s displayed, press the SELECT button to enter.
NOTE: Loss of the satellite signal by the XR9
will result in a series of alarm tones only.
Sleep Mode
In this mode, you have the capability of program
ming the unit to shut off after a selected period of
time. The screen displays Sleep MODE on the
top line, with optional time settings as follows:
Set Alarm
Time Options
Clock
Sleep Mode
Alarm On/ Off
Set Alarm
Alarm Time
Alarm On/ Off
Off
Alarm On/Off
On