Certification and warranty, Fcc class a compliance, Limited warranty – ADC HiGain HMS-318 User Manual
Page 59: Modifications, Safety standards compliance
Certification and Warranty
FCC Class A Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference at his own expense.
Limited Warranty
Product warranty is determined by your service agreement. Refer to the
ADC Warranty/Software Handbook
for
additional information, or contact your sales representative or Customer Service for details.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not
expressly approved by ADC voids the user’s warranty.
All wiring external to the products should follow the provisions of the current edition of the National Electrical Code.
Safety Standards Compliance
This equipment has been tested and verified to comply with the applicable sections of the following safety stan-
dards:
• GR 63-CORE - Network Equipment-Building System (NEBS) Requirements
• GR 1089-CORE - Electromagnetic Compatibility and Electrical Safety
• Binational Standard, UL-60950 3rd Edition/CSA1459 C22.2 No. 60950-00: Safety of Information Technology
Equipment
For technical assistance, refer to